Request a Quote

SAFETY RESOURCE GUIDE

Range Anti-Tip Devices: Requirements & Safety Considerations

Kitchen ranges are designed to safely support cookware and normal cooking activities. However, without proper anchoring, a range can become unstable and tip forward when excessive weight is placed on an open oven door.
To reduce this hazard, manufacturers require the installation of an approved anti-tip device as part of the appliance installation. Proper installation helps protect occupants and supports a code-compliant installation.
Scheduled to inspection
Contact Us

⚠️ DANGER!

RANGE DOORS ARE NOT STEP STOOLS

Standing on an open range door can cause it to break or tip, leading to serious injury from falls, hot surfaces, or heavy objects coming loose.
  • Risk of falls
  • Risk of burns
  • Risk of damage or collapse
Keep children off appliances and use safe step stools designed for climbing.

Safety Device

Residential Ranges

IRC Requirement

Final Inspection Item

Why Anti-tip Devices Matter

A range that tips forward can create serious safety hazards. Children may attempt to stand or climb on an open oven door, while adults may unintentionally place significant weight on the door while loading or unloading cookware.
Without an engaged anti-tip device, the appliance may overturn, potentially causing severe burns, impact injuries, or property damage from spilled hot food and liquids.

Installation Requirements

Anti-tip devices are commonly secured to the floor or wall behind the range.
When the appliance is pushed into its final position, one of the rear leveling legs must properly engage the anti-tip bracket to prevent the range from tipping forward.

Proper Installation Includes

1

Secure the Anti-Tip Bracket

Install the anti-tip bracket according to the manufacturer's installation instructions.

2

Engage the Rear Leveling Leg

Ensure one rear leveling leg fully engages the bracket after the appliance is moved into position.

3

Maintain the Device

If flooring is replaced or the appliance is moved for servicing, verify the bracket remains correctly installed and engaged.

4

Verify Proper Operation

Confirm the appliance resists forward movement before it is returned to service.

  • Inspection Considerations
During a residential inspection, verification of the anti-tip device should be included whenever access allows.
A missing or disengaged bracket may not be visible without carefully moving the appliance or inspecting beneath the lower storage drawer.

Common Verification Methods

Visual Confirmation

Verify the anti-tip bracket is installed in the proper location.

Rear Leg Engagement

Confirm the rear leveling leg is fully engaged with the bracket.

Tip-Resistance Test

Carefully test that the appliance resists forward tipping without causing damage.

Suggested Inspection Comment

Approved anti-tip device was not observed or could not be verified at the kitchen range. Cooking appliances are required to be installed in accordance with the manufacturer's installation instructions. Recommend verification and correction by a qualified appliance installer.

Copy Comment

Code References

2024 IRC Section M1307.1 – Appliance Installation

2024 IRC Section M1307.1.1 – Installation Requirements

Manufacturer's Installation Instructions

Applicable Listing and Labeling Requirements

Summary

Anti-tip devices are inexpensive safety components that provide significant occupant protection.
Proper installation and verification during a home inspection help reduce the risk of range tip-over incidents and support compliance with manufacturer installation requirements.
  • Key Takeaways
  • Verify bracket installation.
  • Confirm rear leg engagement.
  • Inspect whenever access allows.
  • Recommend correction when verification is not possible.

Protect Occupants. Ensure Compliance.

Professional installation verification of anti-tip devices is a simple but essential part of a thorough residential inspection.
Schedule Inspection
Contact Us